Kidde 0919-9999/ RF-SM-DC Battery-Operated Smoke Alarm, Wirelessly Interconnectable Specifications

(Kidde 0919-9999/ RF-SM-DC Battery-Operated Smoke Alarm, Wirelessly Interconnectable Best Price,Cheap Kidde 0919-9999/ RF-SM-DC Battery-Operated Smoke Alarm, Wirelessly Interconnectable) The Kidde 0919-9999 Battery-Operated Wireless Smoke Alarm allows for the easy installation of an interconnected smoke alarm system without the high cost and hassle of rewiring your home. The alarms are wirelessly linked so that when one alarm is triggered, all alarms will sound. This alarm can also be placed in a detached workshop or shed and linked into the home's interconnected system.

Experts recommend interconnected alarms, because when one sounds, they all sound, providing an early warning against fire by dramatically increasing your ability to hear an alarm anywhere in your home, regardless of where the fire starts. Newer homes are required by code to have interconnected alarms. Wireless technology now enables any home to have an interconnected system.

This alarm uses ionization sensing technology. Ionization sensing alarms may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms. Kidde strongly recommends that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fire that can occur within the home.

Choose the Right Wireless Alarms for Your Home
Kidde offers two wireless product options: a Battery Powered Smoke Alarm, and an AC Powered Smoke Alarm. These products enable you to customize your system based on your specific needs. Read below to see which Kidde wireless smoke alarms are best for your home.

Why Wireless? When one alarm sounds they all do Ability to interconnect without wires Install in minutes, anywhere in the home Less cost, and less hassle than re-wiring

An interconnected system provides more warnings in more places in case of smoke or fire in your home.

The Kidde Wireless System alarms have a hush button to silence nuisance alarms. View larger.

Step 1 - Determine the type of smoke alarms currently installed in your house.

1. Battery Powered
No wires; runs only on batteries.
Most older homes have battery-powered smoke alarms. These alarms have no protruding wires and are battery powered.

2. Hardwired
Runs on your home's electricity and may have battery backup. Only one alarm sounds when test button is pressed.
If your home was built in the last 20 years, you probably have hardwired smoke alarms. If only the alarm that you test sounds, then you do not have an interconnected system.

3. Interconnected
Runs on your home's electricity and may have battery backup. All alarms sound when one test button is pressed.
Homes built in the last 15 years may have an interconnected smoke alarm system. If all alarms sound when you test, you have an interconnected system.

Step 2 - Decide how many alarms you need in your home.

The NFPA recommends at least one smoke alarm on every level of the home and in every sleeping area.

Step 3 - Based on your home's current alarm set-up, decide which Kidde Wireless alarms to purchase.

1. If your home has only battery powered alarms:
Purchase enough Kidde Wireless Battery Powered Smoke Alarms (0919-9999) to replace all of your current smoke alarms. You will also have the ability to add Kidde Wireless Battery Powered Alarms in additional rooms for expanded coverage.

2. If your home has only hardwired smoke alarms:
Purchase enough Kidde Wireless AC Powered Smoke Alarms (1279-9999) to replace all of your current smoke alarms. You will also have the ability to add Kidde Wireless Battery Powered Alarms in additional rooms for expanded coverage.

3. If your home has interconnected smoke alarms:
Purchase one Kidde Wireless AC Powered Smoke Alarms to replace one current smoke alarm. Kidde Wireless Battery Powered Alarms can then be installed in additional rooms.

Interconnectable for Improved Safety
Fire and consumer experts recommend interconnected alarms for added protection. According to the National Fire Protection Association (NFPA), most Americans feel they are more at risk of being a victim of a tornado than of a house fire. Actually the opposite is true. Fires are more common than any other disaster that strikes a family at home, and can become deadly in minutes.

You have on average less than three minutes from the time you hear a smoke alarm to escape a fire. The sooner you hear an alarm, the sooner you can get out safely. Smoke alarms that link together so that when one goes off, they all go off, are called interconnected alarms. These alarms provide more warnings in more places, giving your family more time to escape a house fire. Houses built after 1993 are required by building codes to have interconnected alarms that are wired into their electrical system.

Trademarked Hush Feature for Convenience
By pressing the Hush button, you can easily and safely silence nuisance alarms caused by non-emergency situations, such as overcooked dinners.

This alarm's Smart Hush feature has the capability of temporarily desensitizing the alarm circuit for up to 8 minutes. This feature is to be used only when a known alarm condition, such as smoke from cooking, activates the alarm. The smoke alarm is desensitized by pushing the Test/Hush button on the smoke alarm cover. If the smoke is not too dense, the alarm will silence immediately. The red LED will illuminate for 1.5 seconds every 8 seconds while in hush. This indicates that the alarm is in a temporarily desensitized condition. The smoke alarm will automatically reset after approximately 8 minutes and sound the alarm if particles of combustion are still present. Smart Hush can be used repeatedly until the air has been cleared of the condition causing the alarm. Pushing the Test/Hush button on the alarm will end the hush period.

3-AA Batteries, Indicator LED, and Test Feature
Because a smoke alarm only helps protect you if it's working, this unit features a red LED that flashes every 10 seconds to indicate that it is operating correctly. For additional peace of mind, the alarm also contains a test/reset button that enables you to periodically test its circuitry and horn.

The alarm's 3-AA batteries provide continuous protection against smoke and fire hazards, even during power outages. The unit offers a low battery warning that issues a brief chirp every 30 to 40 seconds for at least seven days before losing power, letting you know that it's time to change the battery.

This alarm is UL listed, so you can be confident of its quality, and it is backed by a 10-year limited warranty that lasts the life of the alarm.

About Kidde: A UTC Fire & Security Brand
Renowned for global leadership in fire detection and suppression, Kidde provides solutions ranging from portable fire extinguishers to advanced industrial controls such as flame detection and explosion suppression systems.

Kidde is a UTC Fire & Security brand, with a history that's rich with innovations, from the patent of the Chubb Detector Lock in 1818 to the development of the world's first wireless networked smoke detectors in 2004.

What's in the Box
One 0919-9999 smoke alarm with mounting bracket and mounting hardware, 3- AA batteries, a 10-year limited warranty and a bilingual user's manual.

Kidde KN-SMFM-i Silhouette Hardwire Low Profile Smoke Alarm Specifications

(Kidde KN-SMFM-i Silhouette Hardwire Low Profile Smoke Alarm Best Price,Cheap Kidde KN-SMFM-i Silhouette Hardwire Low Profile Smoke Alarm) No need to worry about faulty batteries with the Kidde KN-SMFM-i Silhouette Low-Profile Smoke Alarm. This no-fuss alarm contains a rechargeable battery that runs off central electricity and lasts the lifetime of the unit. Dependable and easy to install, this no-maintenance alarm saves on labor and material costs over its lifetime. And because this alarm is interconnect-able, builders and do-it-yourself homeowners will quickly discover this is a must-have for remodels and new construction.

This alarm uses ionization sensing technology. Ionization sensing alarms may detect invisible fire particles (associated with flaming fires) sooner that photoelectric alarms. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms. Kidde strongly recommends that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fire that can occur within the home.

Rechargeable Batteries Save Money, Time, and Labor
The Kidde Silhouette Low-Profile Smoke Alarm features a rechargeable lithium battery sealed inside the unit that recharges automatically via central electricity. If there is a power outage, the battery will recharge once the electricity is restored. Over the span of the alarm's life, this no-fuss unit saves homeowners money, time, and labor on battery changes. For builders, landlords, hoteliers, and apartment managers, this innovative feature cuts down on callbacks, material, and labor costs.

The battery is designed to last the lifetime of the alarm, approximately 10 years. Once the alarm has reached the end of its life, it will chirp every 30 seconds, letting you know it's time for a replacement.

Product Highlights Rechargeable battery eliminates battery replacement costs Discreet design protrudes less than 1/2" from ceiling Smart Hush silences alarms in non emergencies Cost saving maintenance-free battery is ideal for high-density residencies Initiating alarm alerts firefighters with a flashing LED

Take a closer look at the Silhouette smoke alarm with 360 degree zoom and other views.

An interconnected system provides more warnings in more places in case of fire in your home.

Interconnect-able for Improved Safety
Fire and consumer experts recommend interconnected alarms for added protection. According to the National Fire Protection Association (NFPA), most Americans feel they are more at risk of being a victim of a tornado than of a house fire. Actually the opposite is true. Fires are more common than any other disaster that strikes a family at home, and can become deadly in minutes.

You have on average less than three minutes from the time you hear a smoke alarm to escape a fire. The sooner you hear an alarm, the sooner you can get out safely. Smoke alarms that link together so that when one goes off, they all go off, are called interconnected alarms. These alarms provide more warnings in more places, giving your family more time to escape a house fire. Houses built after 1993 are required by building codes to have interconnected alarms that are wired into their electrical system.

Thankfully, Silhouette alarms can be linked to create an interconnected system, ensuring that when one alarm sounds, all alarms will sound. Each alarm in the interconnect-able system is equipped with an initiating alarm memory. In the event of an emergency, the smoke alarm that first detects a hazard will feature a flashing LED, allowing firefighters to locate the smoke source quickly and efficiently. All other alarms in the system will sound; however, their LEDs will not flash. This feature is especially useful in apartment buildings, condominiums, hotels, and dormitories. Silhouette’s Low-Profile Smoke Alarm will interconnect to a system containing a maximum of 18 Kidde devices, 12 of which can be smoke alarms.

Trademarked Hush Feature for Convenience
By pressing the Silhouette Low-Profile Smoke Alarm's Hush button, you can easily and safely silence nuisance alarms caused by non-emergency situations, such as overcooked dinners. This alarm's Smart Hush feature has the capability of temporarily desensitizing the alarm circuit for up to eight minutes. This feature is to be used only when a known alarm condition, such as smoke from cooking, activates the alarm.

The smoke alarm is desensitized by pushing the Test/Hush button on the smoke alarm cover. If the smoke is not too dense, the alarm will silence immediately. The red LED will illuminate for 1.5 seconds every eight seconds while in Hush mode. This indicates that the alarm is in a temporarily desensitized condition.

Additionally, the smoke alarm will automatically reset after approximately eight minutes and sound the alarm if particles of combustion are still present. Smart Hush can be used repeatedly until the air has been cleared of the condition causing the alarm. Pushing the Test/Hush button on the alarm will end the hush period.

Meets Industry Standards
Like all Kidde smoke alarms, the Silhouette Low-Profile alarm has been approved by the Underwriters Laboratories (UL), an independent third-party testing laboratory that sets the industry standard for smoke alarms.

About Kidde: A UTC Fire & Security Brand
Renowned for global leadership in fire detection and suppression, Kidde provides solutions ranging from portable fire extinguishers to advanced industrial controls such as flame detection and explosion suppression systems. Kidde is a UTC Fire & Security brand, with a history that's rich with innovations, from the patent of the Chubb Detector Lock in 1818 to the development of the world's first wireless networked smoke detectors in 2004.

What's in the Box
Kidde KN-SMFM-i Silhouette Low-Profile Smoke Alarm with mounting hardware, a 10-year limited warranty and user's manual.

Kidde PI2010 Smoke Alarm Dual Sensor with Battery Backup, White Specifications

(Kidde PI2010 Smoke Alarm Dual Sensor with Battery Backup, White Best Price,Cheap Kidde PI2010 Smoke Alarm Dual Sensor with Battery Backup, White) The Kidde PI2010 Battery-Operated Dual Sensor Smoke Alarm combines photoelectric and ionization sensing technologies into one unit to offer broad detection against smoldering and flaming fires. Experts recommend that for optimal protection you have both types of sensing technology in your home. This smoke alarm's trademarked Hush feature allows you to silence nuisance alarms, while an indicator LED and test feature let you easily confirm that the alarm is working.

The Kidde PI2010 Smoke Alarm: Employs both photoelectric and ionization sensors. Features a hush button to silence the alarm for non-emergency situations like a smoky dinner. Compact design blends in seamlessly with your home decor. Wire-in smoke alarm with 9V battery backup.

With two different sensors, you'll get warnings sooner no matter the kind of fire. View larger.

Be assured of your home's safety with the PI2010 smoke alarm. View larger.

Experts Recommend Protection from Both Types of Fires
Virtually every recognized fire authority recommends the installation of both ionization and photoelectric alarms in order to maximize protection from either flaming or smoldering fires. Kidde offers photoelectric smoke alarms, ionization smoke alarms, and dual sensor alarms, which combine both technologies in one unit. Regardless of the technology, the most important thing is to ensure that you have working smoke alarms on every floor of your home, inside each bedroom and outside sleeping areas. Studies show placing alarms in both bedrooms and hallways could increase a family's escape time by up to 15 minutes.

Fire Authorities recommending both smoke alarm technologies:

Trademarked Hush Feature for Convenience
By pressing the Hush button, you can easily and safely silence nuisance alarms caused by non-emergency situations, such as overcooked dinners.

This feature desensitizes the alarm for approximately seven minutes. During this time, the alarm chirps every 30 to 40 seconds. If the smoke is too dense, the Hush feature is overridden and the alarm still sounds, and the alarm automatically resets at the end of the seven minutes. This convenient safety measure eliminates the temptation to remove the alarm's battery, which creates an unsafe situation.

Wire-in Smoke Alarm with Reliable 9-Volt Battery Backup, Indicator LED, and Test Feature
Because a smoke alarm only helps protect you if it's working, this unit features a red LED that flashes every 30 to 40 seconds to indicate that it is operating correctly. For additional peace of mind, the alarm contains a test/reset button that enables you to periodically test its circuitry and horn.

The PI2010 is a wire-in smoke alarm with 9V battery backup, which provides continuous protection against smoke and fire hazards even during power outages. The unit offers a low battery warning that issues a brief chirp every 30 to 40 seconds for at least seven days before losing power, letting you know it's time to change the battery.

The unit measures just 5.75 inches in diameter and 1.8 inches deep, and it features a neutral, white finish. It features tamper resist features to deter vandalism or theft.

This dual-sensor smoke alarm is UL listed, so you can be confident of its quality, and it is backed by a 10-year limited warranty.

About Kidde: A UTC Fire & Security Brand
Renowned for global leadership in fire detection and suppression, Kidde provides solutions ranging from portable fire extinguishers to advanced industrial controls such as flame detection and explosion suppression systems.

Kidde is a UTC Fire & Security brand, with a history that's rich with innovations, from the patent of the Chubb Detector Lock in 1818 to the development of the world's first wireless networked smoke detectors in 2004.

What's in the Box
Dual Sensor photoelectric/ionization smoke alarm with mounting bracket and mounting hardware, 9-volt battery, 10-year limited warranty, and bilingual user's manual.

The Kidde PI2010 is a breeze to operate and has a hush feature to temporarily silence alarms.

First Alert SCO501CN-3ST ONELINK Battery Operated Combination Smoke and Carbon Monoxide Alarm with Voice Location Specifications

(First Alert SCO501CN-3ST ONELINK Battery Operated Combination Smoke and Carbon Monoxide Alarm with Voice Location Best Price,Cheap First Alert SCO501CN-3ST ONELINK Battery Operated Combination Smoke and Carbon Monoxide Alarm with Voice Location) If you want to build an integrated smoke and carbon monoxide alarm system, but without the cost and hassle of retrofit wiring in your home, the ONELINK Combination Smoke Alarm and Carbon Monoxide Detector is an ideal choice. This alarm provides ultimate protection from two deadly threats, and it is packed with innovative features that give you precious time in the event of an emergency. And because it is able to wirelessly communicate with other ONELINK alarms, this device can help you create a whole-home safety network.

Keep your entire home safe with a network of ONELINK alarms that communicate with each other wirelessly.

ONELINK's mesh network ensures you'll hear an alarm no matter where you are in the house.

The ONELINK Combination Smoke Alarm and Carbon Monoxide Detector At-a-Glance: Allows for wireless alarm interconnectivity. Dual smoke and carbon monoxide detection. Loud 85-dB siren plus talking alarm for safety. Photoelectric smoke sensor reduces false alarms. Two 'AA' batteries included.

You'll hear the loud 85-dB siren even when sleeping or showering. View larger.

Thankfully, the ONELINK Combination Smoke Alarm and Carbon Monoxide Detector is designed to provide you the earliest warning in an emergency. When this clever device detects smoke or carbon monoxide, all integrated ONELINK alarms in your home will together, increasing your chances of getting out safely.

Interconnectivity Without the Wires
Until now, alarms that could signal each other were only available in homes with hardwired systems. All ONELINK alarms, however, communicate with each other wirelessly through integrated radio frequency. This means that when one sounds, they all sound, providing a whole-home safety network.

If you already have an existing system of hardwired alarms, but you are looking for an update, simply replace one of the alarms with the ONELINK Combination Smoke Alarm and Carbon Monoxide Detector--your alarms will continue to be able to communicate with one another.

Talking Alarm Tells You Where the Danger Is
Not only do ONELINK wireless alarms talk to each other, but they also talk to you! Voice warning with location technology means that integrated ONELINK alarms will tell you where the danger is in your home with an actual programmable voice. For example, if there is fire in your basement, the alarm in your bedroom will speak 'Warning, evacuate. Smoke in basement." This feature will help you plan your escape method, so you can evacuate your family as safely as possible.

Accurate Technology Minimizes False Alarms
Utilizing environmentally friendly photoelectric technology to sense smoke, the ONELINK Combination Smoke Alarm and Carbon Monoxide Detector reduces the chance of false alarms caused by cooking or bathing.

Additionally, this alarm features an electrochemical CO sensor, which is the most accurate technology available for detecting CO.

Designed for Safety and Ease of Use
As user-friendly as it is effective, the ONELINK has a dual-purpose button that silences the alarm and tests the system's function. And because the device emits a loud 85-dB siren, you'll be sure to hear it, even if you're asleep or in the shower. The audible low-battery signal can be muted for up to eight hours (so as not to disturb your sleep).

As safe as it is easy to use, this ONELINK device is FCC compliant for wireless device standards, and it meets UL217 and UL2034 standards for combination CO and smoke alarms.

The ONELINK Combination Smoke Alarm and Carbon Monoxide Detector is backed by a five-year limited warranty.

What's in the Box
Combination Smoke Alarm and Carbon Monoxide Detector; two 'AA' batteries; and manual.

The First Alert ONELINK provides more features and better protection than standard alarms.